Silver Foil Facing Butyl Based Sound Damping Material For Car / Van
/ RV Vehicle 480*800*1.6mm
|Alumnium Color :||Blue : Golden ; Silver ; Black|
|Raw Material :||Self-adhesive butyl; Aluminum foil|
|Butyl rubber Color :||Black ; White ; Grey|
|Release Paper :||Yellow ; White ; Brown|
|Thickness :||1.6mm;80mil(Accept customization)|
|Size :||460mm X 800mm;18”x31.5” ( Accept customization )|
|Warranty :||8 years|
|Normal Packaging||1 sheet / box (ordinary or gift box)|
ZZ-05 1.6 mm Thickness Sound Damping Material
ZZ-05 is a sound damping sheet contain Aluminum Foil Facing, high
strength adhesives pure butyl rubber based and double smooth sides
Aluminum butyl rubber sound deadening material mainly used for
vibration damping and sound deadening which is stick on the metal
or painted metal surface,stop vibration from the metal sheet.
For car after market,it is an interior accessory that can reducing
engine noise, wheel noise, road noise, wind noise ,improve car
audio sound quality.
Product size, box design can be customization ;also welcome to use
our standard size product and box.
a. Increases SPL
b. Eliminates sound leakage!
c. Improves Bass Quality and Reduces Bass Distortion
d. Kill unwanted noise, rattles, vibrations
e. Reduce exhaust and engine noise
f. Sound and heat insulation
g. Full car installation reduces unwanted noises 5-8 dB
h. Temperature range of -60 degree ~160 degree
i. Service life:7-8years
Our products competitive
a• Easy-to-install, very high-strength adhesive butyl rubber
b• Better audio sound quality
c• -60℃- 160℃
d• Fire proofing,water prooing
e• Eliminate body/floor vibration
Areas for application
- Products are widly used in the world now,such as auto aftermarket
accessory,building,equipment,and industry which is need for dampen
or eliminate vibration and noise on metal sheet.
- For auto,install it in door panel,floor,roof,trunk and anywhere in
- Sound deadening material can be die cut to shape and placed onto
the body surface directly on painted panels or after the sheet
metal is cleaned before painting (typically at the sealer
application operation). is used to treat metal panels, partitions,
ducts, doors, bins, panels, and so forth in railroad cars, buses,
automobiles, and ships. It is also used for ventilation ducts,
relay cabinets, steel furniture, home appliances, sink units,
computer equipment, machine tools and many other objects that
suffer from vibration-produced noise.
1.Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner.
2.Next, remove dust, grease, moisture, and other foreign matter
from the application surface. Peel off the release liner. The
simplest application technique is to bend the mat slightly and
attach it along its shortest edge.
3.Press the mat firmly into place, using a roller for larger
a.The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity.
b.The temperature of the mat and application surface should not be
below room temperature during fitting.
c.Heating the material is not necessary.
d.Working gloves should be used during installation.