Light Weight Self Adhesive Car Sound and Heat Insulation Material
|Raw Material :||Sponge with adhesion|
|Foam Color :||Grey; Black|
Release Paper :
|Yellow ; White ; Brown|
|Thickness :||5mm (200mil) (Accept customerization)|
|Size :||500mm X 800mm;19.6”x31.5” ( Accept customerization)|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
9 / 10 pcs / Pack ; 2 packs / Carton
|Normal||30 pcs / Carton|
GY-06 5 mm Thickness PU Foam Sound Deadening Material For Auto Accepted
GY-06 is a Heat & Sound insulation material which is made of
It is lightweight, flexible and soft to touch, yet strong, tough,
resilient and resistant to many chemicals and high temperature.
Foam color shall be grey or black
It can eliminate or dampen the vehicle noise that come from engine,
body structure, wheel and more.
Keep cool in car and save energy when air conditioning is opened.
1, Lightweight, flexible and soft ,easy-to-install, very
2, Increases SPL
3, Eliminates or dampen vibration and noise
4. Keep cool.
4, Improves Bass Quality and Reduces Bass Distortion
5, Reduce exhaust and engine noise
6, Full car installation reduces unwanted noises 5-8 dB
7, Temperature range of -20degree ~140 degree
8, Service life:7-8years
Can be die cut to shape and placed onto the body surface directly
on painted panels or after the sheet metal is cleaned before
painting (typically at the sealer application operation). is used
to treat metal panels, partitions, ducts, doors, bins, panels, and
so forth in railroad cars, buses, automobiles, and ships.
Also used for ventilation ducts, relay cabinets, steel furniture,
home appliances, sink units, computer equipment, machine tools and
many other objects that suffer from vibration-produced noise.
Others,used for building construction, electronic industry,
machinery, steel furniture, home appliances noise.
Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner. Next, remove dust, grease,
moisture, and other foreign matter from the application surface.
Peel off the release liner.
The simplest application technique is to bend the mat slightly and
attach it along its shortest edge. Press the mat firmly into place,
using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity.
The temperature of the mat and application surface should not be
below room temperature during fitting. Heating the material is not
Our products competitive
• Easy-to-install, very high-strength adhesive
• Eliminate body/floor vibration
• Better audio sound quality
• Water proof, fire proof material