500 x 800mm(19" x 31.5") High Tack Lightweight Foam Rubber Vehicle
Sound Deadening Material
GY-02 High - Tack Sound Deadening Foam For Vehicle Noise Treatment.
GY-02 Foam Rubber is a Cost-effective deadening material sheet engineered and
produced by the market's requirements.
Foam rubbers are durable materials made of varying blends of
polymers and elastomers that produce some of the most versatile and
unique materials in the foam world.
With one side very high tack self-adhesive, the deadening sheet
installation will be an "easy-going" project for every customer.
And the releasing liner protect the adhesive surely before
It can eliminate or dampen the vehicle noise that come from engine,
body structure, wheel, wind and more.
1, Increases SPL
2, Eliminates or dampen vibration and noise
3, Light weight,easy-to-install, very high-strength adhesive
4, Improves Bass Quality and Reduces Bass Distortion
5, Temperature range of -60 degree ~160 degree
6, Reduce exhaust and engine noise
7, Full car installation reduces unwanted noises 5-8 dB
8, Service life:7-8years
|Raw Material :||Foam rubber with adhesion|
|Foam Color :||Black|
Release Paper :
|Yellow ; White ; Brown|
|Thickness :||6mm (236mil) (Accept customerization)|
|Size :||500mm X 800mm;19.6”x31.5” ( Accept customerization)|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
9 / 10 pcs / Pack ; 2 packs / Carton
|Normal||30 pcs / Carton|
Areas for application
A.Can be die cut to shape and placed onto the body surface directly
on painted panels or after the sheet metal is cleaned before
painting (typically at the sealer application operation). is used
to treat metal panels, partitions, ducts, doors, bins, panels, and
so forth in railroad cars, buses, automobiles, and ships.
B. Also used for ventilation ducts, relay cabinets, steel furniture,
home appliances, sink units, computer equipment, machine tools and
many other objects that suffer from vibration-produced noise.
C. Others,used for building construction, electronic industry,
machinery, steel furniture, home appliances noise.
1.First, cleaning the application area is very important for the
Remove dust, grease, moisture, and other foreign matter from the
application surface. Peel off the release liner.
2.Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner.
The simplest application technique is to bend the mat slightly and
attach it along its shortest edge.
3.Press the mat firmly into place, using a roller will be more
1.The temperature of the mat and application surface should not be
below room temperature during 3. fitting. Heating the material is
2.The roller reduces the risk of leaving air pockets which reduce
sound damping capacity.
Our products competitive
• Eliminate body/floor vibration
• Better audio sound quality
• Easy-to-install, very high-strength adhesive
• Withstand -60℃- 160℃
• Water proof, fire proof material