GY-08 Fibre Cotton Sound Insulation, Sound Deadening Material With
High Adhesive For Automotive
|Raw Material :||Foam rubber with adhesion|
|Fibre Color :||White|
Release Paper :
|Yellow ; White ; Brown|
|Thickness :||18mm (0.7") (Accept customerization)|
|Size :||500mm X 800mm;19.6”x31.5” ( Accept customerization)|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
9 / 10 pcs / Pack ; 2 packs / Carton
|Normal||30 pcs / Carton|
GY-08 Fibre Cotton Sound Insulation, Sound Deadening Material For
GY-02 is a Cost-effective deadening material sheet which made of white
With one side very high tack self-adhesive, and easily cut, the
deadening sheet installation will be an "easy-going" project for
every customer. And the releasing liner protect the adhesive before
It can eliminate or dampen the vehicle noise that come from engine,
body structure, wheel, wind and more.
1, Reduce exhaust and engine noise
2, Full car installation reduces unwanted noises 5-8 dB
3, Temperature range of -60 degree ~160 degree
4, Light weight,easy-to-install, very high-strength adhesive
5, Increases SPL
6, Eliminates or dampen vibration and noise
7, Improves Bass Quality and Reduces Bass Distortion
8, Service life:7-8years
Areas for application
Can be die cut to shape and placed onto the body surface directly
on painted panels or after the sheet metal is cleaned before
painting (typically at the sealer application operation). is used
to treat metal panels, partitions, ducts, doors, bins, panels, and
so forth in railroad cars, buses, automobiles, and ships.
Also used for ventilation ducts, relay cabinets, steel furniture,
home appliances, sink units, computer equipment, machine tools and
many other objects that suffer from vibration-produced noise.
Others,used for building construction, electronic industry,
machinery, steel furniture, home appliances noise.
1.Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner.
2.Next, remove dust, grease, moisture, and other foreign matter
from the application surface. Peel off the release liner.The
simplest application technique is to bend the mat slightly and
attach it along its shortest edge.
3.Press the mat firmly into place, using a roller for larger
1.The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity.
2.The temperature of the mat and application surface should not be
below room temperature during fitting. Heating the material is not
3.Working gloves shoud be used during installation
Our products competitive
• Easy-to-install, very high-strength adhesive
• Eliminate body/floor vibration
• Better audio sound quality
• Withstand -60℃- 160℃
• Water proof, fire proof material