Automotive Fibre Sound Absorbing Material, Soundproofing and
|Alumnium Color :||Silver|
|Raw Material :||1.5mm Thick Butyl; 0.05mm Foil; 15mm Thick Fibre|
|Butyl rubber Color :||Black|
|Fibre Color :||White|
|Release Paper :||Yellow ; White ; Brown|
|Thickness :||17mm; 0.66"|
|Size :||460 mm X 800 mm; 18”x31.5” ( Accept customerization)|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
|Bulk Kits||9 / 10 pcs / Pack ; 2 packs / Carton|
|Normal Packaging||20 pcs / Carton|
ZZXY-13 Automotive Polypropylene Fibre Sound Insulation and Thermal
Insulation is the multi layers sound deadening material which is enhanced
based on the aluminum butyl rubber sound damping material.
Structure: fibre faced +silver foil + self adhesion butyl rubber
based + releasing liner
It mainly used for vibration damping and sound deadening, reducing
car engine noise, wheel noise, road noise, wind noise ,improve car
audio sound quality.
Application area: door panel, under dash, floor, trunk and more
• Easy-to-install, very high-strength adhesive butyl
• Eliminate body/floor vibration
• Better audio sound quality
• Good to160℃
• Water proof, fire proof
It can be die cut to shape and placed onto the body surface
directly on painted panels or after the sheet metal is cleaned
before painting (typically at the sealer application operation). is
used to treat metal panels, partitions, ducts, doors, bins, panels,
and so forth in railroad cars, buses, automobiles, and ships.
It is also used for ventilation ducts, relay cabinets, steel
furniture, home appliances, sink units, computer equipment, machine
tools and many other objects that suffer from vibration-produced
1.Clean up the mounting surface, like the hood, trunk, floor, (for
door and roof , need to remove the door panel, roof panel) with a
quick-drying and residue-free solvent. Remove all dust, dirt, oil,
2.Use scissors or knife ,cut the mat into desired size and shape
before removing the release liner.
3.Peel off the releasing liner,press the mat firmly into place, using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity.
1.work gloves should be used when handle foil backed material because the sharp edges when cut to different size
2. No need hot gun.
3. Installation room temperature should not below 16 ℃
Our products competitive
Improves Bass Quality and Reduces Bass Distortion
Kill unwanted noise, rattles, vibrations
Reduce exhaust and engine noise
Full car installation reduce noises 5-8 dB
Temperature range of -60 degree ~160 degree